TM 10-4610-310-14
0112 00
SWITCH, SELECTOR, 2-POSITION (SW1) - continued
Figure 3. Power Distribution Panel Wiring Diagram.
PANEL RECEPTACLE (J1, J2, J3, J4, J5)
Removal
1. Remove four screws (16), flat washers (15), and nuts (14) from panel receptacle (17). See Figure 2.
2. Disconnect three wires (green, black, white) from rear of receptacle. Tag the wires for proper location. See
Figure 3.
3. Remove wiring latch from rear of receptacle.
4. Remove receptacle from cutout in cover.
Installation
1. Position panel receptacle into cutout in cover.
2. Place wiring latch on rear of receptacle.
