TM 10-4610-310-14
0110 00
Distribution Pump
1.
Refer to Figure 2 for this procedure section.
2.
Install elbow (1) on the pump.
3.
Install male camlock (2) and dust cap (3).
4.
Install female camlock (4) and dust cap (5).
Booster and Backwash Service Pumps
1.
Refer to Figure 3 for this procedure section.
2.
Install elbow (1) on the pump.
3.
Install bushing (2) on the elbow (1).
4.
Install male camlock (3) and dust cap (4).
5.
Install bushing (5) on the pump.
6.
Install female camlock (6) and dust cap (7).
END OF WORK PACKAGE
0110 00-3 / 4 blank
