TM 10-4610-310-14
0120 00
Piston and connecting rod assembly
Reinstall the piston and connecting rod assembly. See WP 0121 00.
Balancer shaft
Install the balancer shaft by aligning the dots on the balancer shaft gear teeth and the crankshaft gear teeth by
rotating the shafts. See Figure 8.
Figure 8. Aligning gear teeth.
Camshaft
4. Install the tappets.
5. Install the camshaft by aligning the dots on the camshaft gear teeth and the crankshaft gear teeth by rotating
the shafts. See Figure 8.
The alignments of the dots on the gears can be seen in Figure 9.
Figure 9. Gear Train Alignment.
