TM 10-4610-310-14
0120 00
DISASSEMBLY - continued
3. Remove the balancer shaft oil seals (1,4) only if necessary. See Figure 4.
Piston and Connecting Rod Assembly
Remove Piston and connecting rod assembly. See WP 0121 00.
Flywheel
1. Loosen the lock nut (5) and washer (4) from flywheel (3) and crankshaft (2). See Figure 5.
Figure 5. Flywheel.
2. Remove the flywheel (3).
3. Remove the key (1) from the crankshaft (2).
Crankshaft
1. Remove screw (1) and retainer (2). See Figure 6.
Figure 6. Crankshaft removal.
2. Remove crankshaft (5) and gears (4,7) taking care not to damage the oil seals (3, 9).
3. Remove key (6).
4. Remove oil seals (3,9) and bearing (8) only if necessary.
