TM 10-4610-310-14
0120 00
DISASSEMBLY - continued
Fuel Pump
The removal of camshaft can be accomplished without removing the fuel pump. The fuel pump needs to be
loosened to free up the camshaft.
Camshaft
1. Ensure that the push rods (2) are removed.
2. Rotate the camshaft (4) and note the alignment dots on the camshaft gear teeth (5) for assembly.
3. Push up the tappets (3) and pull out the camshaft (4) from the engine block. See Figure 3.
4. Remove the tappets (3).
Figure 3. Camshaft.
5. Identify exhaust and intake tappets for reassembly.
6. Remove the oil seal (1) only if necessary.
Balancer Shaft
1. Rotate the balancer shaft and note the alignment dots on the gear teeth (3) for assembly. See Figure 4.
2. Pull out balancer shaft (2) from the engine block.
Figure 4. Balancer Shaft.