TM 5-3800-205-10-2
TROUBLESHOOTING PROCEDURES - CONTINUED
0011 00
Table 2. Transport Mode Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
CH-47 HELICOPTER TRANSPORT - CONTINUED
Open relief valve if required. If
Check that auxiliary fuel tank
4.
Engine Starts But Stops Running,
problem still exists, refer to
pressure relief valve is open (WP
When Connected to Auxiliary Fuel
ENGINE troubleshooting (WP
Tank.
Reconnect air connection, if
5.
Poor and/or No Braking
(After
Check air connection on right
required. If problem still exists,
Machine Assembly).
side of draft frame for leaks and/
refer to AIR SYSTEM AND
or loose connection.
BRAKES troubleshooting (WP
1. Remove locking collars and
6.
Poor
Steering
(After
Machine
1. Check that locking collars and
hose wrapping from cylinders,
Assembly).
hose wrapping are removed
if required. If problem still
from cylinders.
exists, refer to STEERING
trouble-shooting (WP 0010
2. Check that frame locking
2. Remove frame locking blocks,
blocks are removed.
if required. If problem still
exists, refer to STEERING
trouble-shooting (WP 0010
Reconnect electrical connec-
7.
Rear Blackout Drive Light Does Not
Check electrical connectors on
tions, if required. If problem still
Operate (After Machine Assembly).
right side of draft frame for loose
exists, refer to ELECTRICAL
connections.
SYSTEM troubleshooting (WP
Reconnect electrical connections
Check electrical connectors on
8.
Rear Blackout Drive Marker Light
if required. If problem still exists,
right side of draft frame for loose
Does Not Operate (After Machine
refer to ELECTRICAL SYSTEM
connections.
Assembly).
troubleshooting (WP 0010 00).
9.
Skid Steer Control Inoperative.
Check for blown fuse at fuse/
If fuse is bad, request a
circuit breaker panel in cab.
replacement fuse from Unit
Maintenance. If fuse is good, and
problem still exists, notify Unit
Maintenance.
Reconnect
electrical
con-
10. Stoplights Do Not Operate (After
Check electrical connectors on
nections, if required. If problem
Machine Assembly).
right side of draft frame for loose
still exists, refer to ELECTRI-
connections.
CAL SYSTEM troubleshooting
