TM 5-3800-205-10-2
TROUBLESHOOTING PROCEDURES - CONTINUED
0011 00
Table 2. Transport Mode Troubleshooting Procedures.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
C-130 AIRCRAFT TRANSPORT
Remove locking collars and hose
1.
Poor
Steering
(After
Machine
Check that locking collars and
wrappings from cylinders, if
Assembly).
hose wrappings are removed
required. If problem still exists,
from steering cylinders.
refer to STEERING trouble-
shooting (WP 0010 00).
If load transfer relief valve and
Check if load transfer relief valve
2.
Tank Operation is Erratic, After
hose assembly is properly
and hose assembly is properly
Installation of Load Transfer Relief
installed, and problem still exists,
installed (WP 0017 00).
Valve and Hose Assembly.
notify Unit Maintenance.
Reconnect hydraulic hoses if
Check hydraulic hoses at draft
3.
Tank Operation is Erratic, After
required. If problem still exists,
frame for proper connections
Removal of Load Transfer Relief Valve
refer to WATER DISTRIBU-
and Hose Assembly.
TOR SYSTEM troubleshooting
4.
Windshield Washer Inoperative (After
1. Check that fluid hose is
1. Install fluid hose, if removed.
If problem still exists, go to test
Machine Assembly).
installed (WP 0017 00).
step 2.
2. Check fluid reservoir inside
2. If reservoir is empty, fill
engine compartment.
reservoir (WP 0013 00). If
problem still exists, go to test
step 3.
3. Check for blown fuse.
3. If fuse is bad, request a
replacement fuse from Unit
Maintenance. If fuse is good,
refer to ELECTRICAL SYS-
TEM troubleshooting (WP
1. Reconnect electrical connec-
5.
Windshield Wiper Motor Inoperative
1. Check wiper motor electrical
tors if required. If problem still
(After Machine Assembly).
connectors
for
loose
exists, go to test step 2.
connections (WP 0017 00).
2. Check for blown fuse.
2. If fuse is bad, request a
replacement fuse from Unit
Maintenance. If fuse is good,
refer to ELECTRICAL SYS-
TEM troubleshooting (WP
