TM 5-3800-205-10-2
TROUBLESHOOTING PROCEDURES - CONTINUED
0011 00
Table 2. Transport Mode Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
C-130 AIRCRAFT TRANSPORT - CONTINUED
Check that pivot and drive shaft
Tighten pivot and drive shaft
6.
Windshield Wiper Motor Operates But
nuts are tight (WP 0017 00).
nuts, if required. If problem still
Wiper Arm Will Not Move (After
exists, notify Unit Maintenance.
Machine Assembly).
CH-47 HELICOPTER TRANSPORT
Reconnect electrical connectors,
1.
Backup Alarm Inoperative
(After
Check electrical connectors at
if required. If problem still exists,
Machine Assembly).
draft arm for loose connection
refer to ELECTRICAL SYSTEM
troubleshooting (WP 0010 00).
2.
Engine Cranks But Fails to Start (After
1. Check fuel level in tank.
Fill tank to proper level, if
Machine Assembly).
required. If problem still exists,
go to test step 2.
(a)
Reconnect
hoses,
if
2. Check fuel hoses on right side
required. If problem still
of draft frame for secure
exists, go to step b.
connection or leaks (WP 0016
(b)
Use electrical prime pump
to prime fuel system. If
problem still exists, go to
step c.
(c)
Refer to ENGINE trouble-
shooting (WP 0010 00).
3.
Engine Cranks But Fails to Start, When
1. Check fuel level in auxiliary
1. Fill fuel tank to correct level. If
problem still exists, go to test
Connected to Auxiliary Fuel Tank.
fuel tank.
step 2.
2. Reconnect
jumper
hose
2. Check fuel jumper hose
assembly, if required. If
assembly
for
secure
problem still exists, go to test
connection or leaks (WP 0016
step 3.
3. Reconnect hose assembly. If
3. Check hose assembly between
problem still exists, refer to
auxiliary fuel tank and
ENGINE
troubleshooting
bulkhead quick disconnect
coupler for secure connection
or leaks (WP 0016 00).
