TM 5-4610-223-12
TM 4610-223-12/4-66
1.
Adapter, pipe-to-tubing,
5.
Nipple, pipe, 1/8 x 1-1/2 in.
1/2 in,
6.
Bushing, pipe, 1/8 x 1/2 in.
2.
Bushing, pipe, 1/2 x 1 in.
7.
Adapter, pipe
3.
Pipe, cross, 1 in.
8.
Adapter, tube
4.
Pipe plug, 1 in.
9.
Pipe nipple
Figure 4-66. Slurry Ejector, Exploded Vie-a.
(5)
Screw bushing (2) in cross pipe (3).
(6)
Screw adapter (1) in pipe bushing (2).
g.
Installation.
(1)
Position slurry ejector (6, fig. 4-65) in slurry feeder tank outlet and screw it in tight.
(2)
Connect plastic tubing line (9) to adapter (8).
(3)
Connect copper tubing flare nut (1) to connector (5).
4-88. SLUDGE CONCENTRATOR VALVES AND DRAW-OFF PIPING.
a.
General. The sludge concentrator tank valve and draw-off piping (fig. 4-67) are mounted in the sludge
concentrator tank. They are used to fill the sludge concentrator tank and to allow settled clear water to flow through an
adjustable orifice to the wet well tank.
4-142
