TM 5-4610-223-12
(4)
Install pipe (10) into tee (8) and secure pipe to top of erdlator with clamp (9).
(5)
Install pipe (11) into tee (8) and screw orifice range (14) onto pipe (11).
(6)
Install flow indicator assembly (16) onto flange assembly (14) using the screw (15), washers (13) and nuts
(12).
(7)
Screw pipe (20) into lower flange (14), and secure pipe (20) with the U-bolt (19), washers (17) and nuts
(18).
(8)
Screw elbow (21) onto pipe (20), and nipple (22) into elbow (21).
(9)
Screw tee (24) onto nipple (22) and sight glass (23) onto tee (24).
(10)
Screw bushing (25) into tee (24) and adapter (28) into the bushing (25).
(11)
Install hose (27) onto adapter (28) and secure with clamp (26).
4-93. RAW WATER FLOAT VALVE BYPASS PIPING.
a.
Removal.
(1)
Remove screws (8, fig. 4-61), washers (9), and straps (4) from pipe (7).
(2)
Separate union (6) and remove half union from pipe (7).
(3)
Disconnect float lever from float valve (11, fig. 4-72).
(4)
Remove pipe (1) from tee (2).
(5)
Disconnect elbow union (12) and turn elbow half of the union down.
(6)
Remove nipple (13), tee (2), nipple (3), valve (4), and other nipple (3) from the other tee (2).
(7)
Remove half union from nipple (13).
(8)
Remove nipple (9) from valve (11) and remove half union from nipple.
(9)
Remove nipples (9) from valves (10 and 11) and from tee (7).
(10)
Remove tee (7) from nipple (6) and the nipple from tee (2).
4-152
