TM 5-4610-223-12
1.
Pipe, 2 x 17 in.
8.
Draincock, 1/2 in. npt
2.
Tee, pipe, 2 x 2 x 1-1/2 in.
9.
Nipple, pipe, 1-1/2 x 1-3/4
(1 reqd)
in. (3 reqd)
3.
Nipple, pipe, 2 x 4-1/2 in.
10.
Valve, gage, 1-1/2 in.
(2 reqd)
11.
Valve, float, 1-1/2 in.
4.
Valve, gate, 2 in.
12.
Elbow, w/female union,
5.
Pipe, 2 x 13 in.
90 degree, 1-1/2 in.
6.
Nipple, pipe, 1-1/2 x 3-1/2
13.
Nipple, pipe 1-1/2 x
in.
x 2-1/2 in.
7.
Tee, pipe, 1-1/2 x 1/2 x
x 1-1/2 in.
Figure 4-72. Raw Water Float Valve Bypass Piping, Exploded View.
(11)
Remove draincock (8) from tee (7).
(12)
Remove tee (2) from pipe (5) and remove pipe (5) from tee (7, fig. 4-71).
b.
Inspect. Inspect all parts for damage.
c.
Replace. Replace all damaged parts.
d.
Installation.
(1)
Screw pipe (5, fig. 4-72) in tee (7, fig. 4-71).
(2)
Install a tee (2, fig. 4-72) on opposite end of pipe (5), then a nipple (3) in tee and valve (4) on the nipple.
(3)
Install nipple (6) in tee (2) and tee (7) on the nipple. Screw draincock (8) in tee (7).
4-153