TM 10-4610-229-24
2-106. POWER TAKEOFF REPLACEMENT
This task covers:
a.
Drive Pulley Removal
c. Installation
b.
Removal
d. Drive Pulley Installation
INITIAL SETUP
Use With
Supplies
High Pressure Pump Assembly
Oil, item 24, appendix C
Tools
Equipment
Condition
General Mechanic's Automotive
Para
Condition Description
Tool Kit, item 10, appendix B
2-81
V-belts removed.
a. Drive Pulley Removal
1
Mark location of coupling on engine drive shaft.
2
Remove three coupling bolts.
3
Screw three coupling bolts evenly into threaded holes of pulley to separate coupling from pulley.
4
Tap wedge in slot of coupling. Remove coupling.
5
Remove three bolts from threaded holes.
6
Mark location of pulley on drive shaft. Remove pulley.
7
If replacing drive pulley only, go to subpara d.
2-261
