TM 10-4610-229-24
3-7. STARTER ASSEMBLY REPAIR (CONT)
a. Disassembly
1
Remove nut, starwasher, flatwasher, and terminal from solenoid.
2 Remove two nuts, flatwashers, and lockwashers. Remove solenoid.
3 Remove two nuts, lockwashers, and flatwashers. Carefully remove cover from starter assembly.
4 Remove bolts, electrical leads, and brushes from brush holders.
5 Remove five flatwashers from armature.
6
Remove five screws from armature housing.
CAUTION
Use care when removing housing from armature assembly, to prevent damage to windings.
7
Remove armature housing from armature assembly.
3-14