TM 10-4610-232-34
Open control panel door.
Tag and disconnect electrical wires from switch (3).
Remove nut (1) and Iockwasher (2).
(1)
(2)
(3)
Figure 2-25. Upper Exterior Panel (sheet 1 of 2), Indicator Lamps
(2) Unscrew lens (1), depress lamp (2) and turn lamp (2) counterclockwise.
(3) Tag and disconnect wires from contact block (5).
(4) Remove nut (3), Iockwasher (4) and washers (6). Remove block (5) from panel assembly.
b. Refer to Figure 2-25, sheet 2 and disassemble seventeen pushbutton switches as follows:
Figure 2-25. Upper Exterior Panel (sheet 2 of 2). Pushbutton Switches
2-120 Change 1