TM 10-4610-240-10
TM 08580C-10/1
T.O. 40W4-13-21
d.
(1)
Assemble element puller by screwing together the puller rod (1) and puller rod handle (2).
LEGEND:
1. PULLER ROD
2. PULLER ROD HANDLE
FIGURE 3-2. R.O. VESSEL, ELEMENT PULLER
LEGEND:
1. ELEMENT PULLER (ASSEMBLED)
5.
INTERCONNECTOR
2. R.O. VESSEL
6.
ELEMENT PULLER PLATE
3. END CONNECTOR
7.
FLAT WASHER
4. R.O. ELEMENTS
8.
NUT
FIGURE 3-3. R.O. VESSEL ELEMENT PULLER ASSEMBLY
NOTE
If possible, remove elements in direction of flow. Because of obstruction by generator, ARMY users must
remove and install elements from trailer hitch end.
MC and AF users must remove top and second from bottom elements from R. O. pump end, and install
from chemical feed pump end. The bottom and second from top elements are removed from chemical
feed pump end and installed from R. O. pump end.
3-18
