TM 10-4610-240-10
TM 08580C-10/1
T.O. 40W4-13-21
(12) Align end caps with matchmark on R.O. vessel (figure 3-1).
(13) Press end caps onto studs.
(14) Place 10 washers and nuts onto studs.
(15) Slowly and evenly tighten nuts until handtight (snug). Never turn one nut more than two turns at a
time. Once handtightened, evenly tighten each nut 1/8 turn with wrench.
(16) Reconnect pipes to R.O. vessel.
(a)
Place gasket (6) back on pipe.
(b)
Swing elbow (7) back into place and put onto gasket (6).
(c)
Put clamp (5) over gasket (6).
(d)
Put bolts (4) into clamps (5).
(e)
Put nuts (3) on bolts (4).
(f)
Reconnect hoses (2) with clamp (1).
(17) Operate ROWPU (paragraph 2-9) and observe for leaks.
3-5. CHANGING CARTRIDGE FILTER TUBE ELEMENTS (Refer to Figure 3-10).
a.
Description . The cartridge filter contains eight filter tube elements. Cartridge filter tube elements should be
changed whenCARTRIDGE FILTER gauge differential pressure rises above 20 psid.
3-23
