TM 10-4610-310-14
0006 00
OFFLOADING THE LWP - continued
BII & COEI BOXES
RAMP IS NOT
SHOWN FOR
CLARITY
Figure 14. Offloading Basic Issue Items and Components of the End Item Boxes.
26. Unload Basic Issue Items (BII) box and Components of End Item (COEI) box from the vehicle. See Figure
14.
27. Place the BII and COEI boxes in the LWP operational area near the control module.
28. Account for all the BII and COEI. See WP 0134 00.
GENERATOR OFFLOADING
Determine the placement site and offload the 3kW TQG set. See Figure 15.
1. Make sure all of LWP modules, hoses, and electrical cables have been placed in the operational area
before offloading the 3kW TQG set.
2. Make sure the ramp is secured to the tailgate of the HMMWV.
WARNING
Place the 3kW TQG set with the fuel tank opposite the hand truck. This will prevent any fuel
spills on the equipment or personnel during offload. Death or injury to personnel may result.
3. Slide the 3kW TQG set toward the rear of the cargo compartment (near tailgate). Ensure the fuel tank is
toward the rear of the vehicle. See Figure 15.
4. Secure with a tie-down strap around 3kW TQG set and hand truck handle. Tighten securely. See Figure 16.
