TM 10-4610-310-14
0085 00
BACKWASH INLET PIPING continue
6. Install the check valve (5). Ensure that the arrow on the body of the check valve is in line with the
direction of the flow.
7. Install the flow control valve (6) if necessary.
8. Install support washer (12) and a new 30-mesh screen (13) if removed.
BACKWASH/FILTRATE PIPING
1. Refer to Figure 6 for this piping.
2. Mount the piping in its location.
3. Tighten the unions (5,1).
4. Install the U-bolt (2) and fasten the lock nuts (4) washers (3) to the U-bolt (2).
UF REJECT PIPING
1. Refer to Figure 7 and Figure 8 for this piping.
2. Mount the piping in its location.
3. Install the check valve (7). Ensure that the arrow on the body of the check valve is in line with the
direction of the flow.
4. Tighten unions (1,2,3, and 4) as required.
5. Install the U-bolt (1) and fasten the lock nuts (2) washers (3) to the U-bolt (1).
6. Fasten the solenoid valves with screws (4), lock washers (5) and washers (6).
7. Connect the coils to the solenoid valves.
UF REJECT OUTLET PIPING
1.
Refer to Figure 9 for this piping.
2.
Mount the piping in its location.
3.
Tighten unions (2 and 7).
4.
Install the U-bolt (1) and fasten the lock nuts (4) washers (3) to the U-bolt (1).
FAST FLUSH MANIFOLD PIPING
1.
Refer to Figure 10 for this piping.
2.
Mount the piping in its location.
3.
Tighten the unions (3,2).
4.
Install the drain valve (1) if necessary.
FAST FLUSH PIPING
1.
Refer to Figure 11 for this piping.
2.
Mount the piping in its location.
3.
Tighten the unions (1,2,6).
4.
Fasten the solenoid valves with screws (3), lock washers (4) and washers (5).
5.
Install the coil on the solenoid.
TANK VENT PIPING
1.
Refer to Figure 12 for this piping.
2.
Mount the piping in its location.
3.
Tighten the unions (1,9).
5.
Install the U-bolt (4) and fasten the lock nuts (6) washers (5) to the U-bolt (4).
8.
Install the check valve (2) if necessary. Ensure that the arrow on the body of the check valve is in line
with the direction of the flow.
6. Install the vacuum breaker (3), hose adapter (8), and pressure relief valve (7) if necessary.
0085 00-9
