TM 10-4610-310-14
UNIT MAINTENANCE
LIGHTWEIGHT WATER PURIFIER
RECOIL STARTER AND STARTER ROPE
REMOVAL/INSTALLATION
INITIAL SETUP
Tools
Material/Parts
Tool Kit, General Mechanics, Automotive
Rags, cotton, (item 21, WP 0136 00)
Starter Rope (PN 160260-76630)
GENERAL
This work package contains instructions on removal and installation of starter rope and recoil starter assembly.
The recoil starter should be replaced as a unit. Remove the starter rope only if it breaks.
REMOVAL
Recoil Starter
1. Remove bolts (1), and remove the recoil starter assembly (2) from flywheel housing (3). See Figure 1.
FLYWHEEL
HOUSING
BOLTS
Figure 1. Recoil Starter Removal.
Flywheel Housing
Remove flywheel housing (3) by removing bolts. See Figure 1.
Starter Rope
1. Note how and where the rope is anchored on the recoil assembly (2).
2. Remove the starter rope from the recoil starter assembly (2) and handle (5).
