TM 10-4610-310-14
0101 00
REMOVAL - continue
2. Remove gasket (4).
3. Remove screws (2) and muffler cover (1) only if necessary.
4. Removing mounting studs (5) only if necessary.
INSPECTION
1. Inspect the muffler for excessive rust and damage.
2. Inspect the gasket for damage or deformity.
INSTALLATION
1.
Refer to figure 1 for this procedure section.
2.
Install mounting studs (5) if necessary.
3.
Install muffler cover (1) on the muffler (7) and secure with screws (2) if necessary.
4.
Slide the gasket (4) on the mounting studs.
5.
Install the muffler (7) and secure with nuts (3) and bolts (6)
END OF WORK PACKAGE
0101 00-2
