TM 10-4610-310-14
0100 00
INSPECTION
Inspect the rope for abrasions or worn threads.
Rotate the recoil assembly back and forth to inspect for binding or excessive worn parts.
INSTALLATION
Starter Rope
1. Make a knot at one end of the rope.
2. Rotate the recoil assembly counter-clock wise all the way.
RECOIL
ASSEMBLY
ROPE HOLE
Figure 2. Starter Rope Installation.
3. Hold the recoil assembly from rotating. Figure 2.
4. Feed the rope through the recoil assembly and the rope hole.
5. Slide the rope all the way out. The knotted end should be engaged in anchor on the recoil starter
assembly.
6. Keep tension on the rope to prevent it from being recoiled. Feed the rope through the handle and make a
knot at the other end.
7. Allow the rope to be recoiled in slowly.
Flywheel Housing
Install flywheel housing (3) by installing bolts. See Figure 1.
Recoil Starter
Install the recoil starter (2) on the engine (3) and secure with four bolts (1). See Figure 1.
END OF WORK PACKAGE
