TM 10-4610-310-14
0110 00
Distribution Pump
1. Remove male camlock (2) and dust cap (3). See Figure 2.
2. Remove elbow (1) from the pump.
3. Unthread female camlock (4) and dust plug (5).
Figure 2. Distribution Service Pump.
Booster and Backwash Pump
1. Remove male camlock (3) and dust cap (4). See Figure 3.
2. Remove bushing (2) and elbow (1) from the pump.
3. Unthread female camlock (6) and dust plug (7).
4. Remove bushing (5) from pump.
Figure 3. Booster and Backwash Service Pump.
INSTALLATION
Raw Water Pump
1. Refer to Figure 1 for this procedure section.
2. Install elbow (1) on the pump and bushing (2) on the elbow (1).
3. Install male camlock (3) and dust cap (4) on the bushing (2).
4. Install adapter (5) on the pump.
5. Install reducing female camlock (6) on the adapter (5).
6. Install 10-mesh screen (7) and dust plug (8) if removed.
