TM 10-4610-310-14
UNIT MAINTENANCE INSTRUCTIONS
LIGHTWEIGHT WATER PURIFIER
SERVICE PUMP RECEPTACLE
REMOVAL/INSTALLATION
INITIAL SETUP
Tools
Equipment Condition Required
Tool Kit, General Mechanic, Automotive
Equipment de-energized
Materials/Parts
Rags, cotton, (item 21, WP 0136 00)
Receptacle, (PN MS3452W16-10P)
GENERAL
This work package contains the instructions for the removal and replacement of the electrical receptacle on the
terminal box on the service pumps (raw water, distribution, booster, and backwash) used in the Lightweight
Water Purifier (LWP). This instruction applies to all service pumps.
DISASSEMBLY
1. Remove hoses and electrical cable from service pump.
NOTE
It is not necessary to remove service pump from the mounting plate or quick disconnect adapter
and coupling from pump sleeve.
2. Loosen two bolts on mounting plate.
3. Push handle forward to clear receptacle. See Figure 1.
TERMINAL BOX
ELECTRICAL
RECEPTACLE
QUICK DISCONNECT
ADAPTER
HANDLE
PUMP
SLEEVE
QUICK
BOLT (2
DISCONNECT
PLACES)
COUPLING
Figure 1. Service Pump.
