TM 10-4610-229-24
3-54. INJECTION PUMP REPLACEMENT (CONT)
c. Removal
1
Remove five nuts, screws, and clamp brackets.
2
Remove line nuts on ends of six fuel delivery lines. Tag, remove, and plug fuel delivery lines.
3 Unscrew two line nuts on fuel line from fuel filter to fuel transfer pump. Remove and plug fuel line.
4
Unscrew fuel line fitting from fuel filter block and transfer pump fuel block. Remove and plug fuel line.
5
Unscrew four line nuts. Tag, remove, and plug both fuel lines from fuel filter block to fuel injection pump.
6
Remove cotter pin and clevis pin. Disconnect run/stop lever.
7
Remove cotter pin and clevis pin. Disconnect engine throttle control cable.
3-140
