TM 10-4610-239-24
TM 08580B-24/3
ASSEMBLY. (Cont)
c.
Install all wiring harnesses. Refer to paragraph 3-38.
d.
Install R.O. pump and motor stand. Refer to paragraph 2-129.
e.
Install control box assembly. Refer to paragraph 3-32.
f.
Install chemical feed metering pump stand, brackets, and mounting plate. Refer toparagraph 2-117.
g.
Install cartridge filter pulse dampener, and multimedia filter vent valves. Refer to paragraph 2-113.
h.
Install four ball valves. Refer to paragraph 2-112.
i.
Install four elliptic valves. Refer to paragraph 2-111.
j.
Install backwash check valve. Refer to paragraph 2-110.
k.
Install relief valve. Refer to paragraph 2-109.
l.
Install product water check valve. Refer to paragraph 2-108.
m.
Install seven drain ball valves. Refer to paragraph 2-107.
n.
Install needle valve. Refer to paragraph 2-106.
o.
Install water meter. Refer to paragraph 2-105.
p.
Install R.O. pressure gage. Refer to paragraph 2-104.
q.
Install cartridge filter, multimedia filter, and R.O. vessels differential pressure gages. Refer to paragraph 2-103.
r.
Install product water flowmeter. Refer to paragraph 2-101.
s.
Install backwash valve. Refer to paragraph 2-100.
t.
Install backwash water flowmeter. Refer to paragraph 2-99.
u.
Install brine water flowmeter. Refer to paragraph 2-98.
v.
Install raw water flowmeter. Refer to paragraph 2-97.
w.
Install vent vessels gate valve. Refer to paragraph 2-95.
x.
Install all piping. Refer to paragraph 2-94.
y.
Install R.O. pressure tubes. Refer to paragraph 2-92.
z.
Install backwash timer assembly. Refer to paragraphs 2-90 ( ulligan) and 2-91 (MECO).
C
aa.
Install diaphragm valve assembly. Refer to paragraph 2-87.
ab.
Install multimedia filter control valve. Refer to paragraph 2-86.
4-10
