TM 10-4610-240-10
TM 08580C-10/1
T.O. 40W4-13-21
b. Removal.
(1)
Shut down ROWPU in the normal manner (see paragraph 2-14).
(2)
Open VENT CARTRIDGE FILTER valve (figure 2-56).
(3)
Open DRAIN NO. 1 CARTRIDGE FILTER valve (figure 2-62).
NOTE
Cover is installed under spring tension. Relieve tension by loosening eyebolts a few turns at a time in an
alternating pattern.
(4)
Loosen six eyebolts (4, figure 3-10). Disengage eyebolts (4) from the cover brackets (7) by swinging
down.
(5) Disconnect hose from vent (8) on filter cover (1). Lift off cover with attached parts (1). Inspect O-ring
(3) for cracks, breaks and hardening. Replace O-ring if damaged.
FIGURE 3-10. CARTRIDGE FILTER ASSEMBLY
3-24
