TM 10-4610-240-10
TM 08580C-10/1
T.O. 40W4-13-21
(6)
Remove the eight filter tubes (2) from shell (5) and discard.
c.
Installation.
(1)
Install eightnew filter tubes (2) making sure that the tubes seat in the bottom cartridge seats (6).
(2)
Lubricate and replace O-ring (3) and filter cover (1).
CAUTION
Ensure all filter tubes are properly seated and filter cover is properly aligned before tightening eyebolts.
(3)
Slide eyebolts (4) into cover brackets (7) and tighten in the order shown in figure .
(4)
Attach quick-disconnect to vent (8).
FIGURE 3-11. CARTRIDGE FILTER END PLATE (NUT TIGHTENING SEQUENCE)
3-25
