TM 10-4610-310-14
0037 00
Table 1. Preventive Maintenance Checks and Services.
ITEM TO BE
EQUIPMENT
ITEM NO.
INTERVAL MANHOUR CHECKED OR
PROCEDURE
NOT READY/
SERVICED
AVAILABLE IF
Inspect the air cylinder, and linkages
Engine shut off
32.
Before
for damage. Ensure that the assy. is
butterfly valve assy.
mounted securely.
Inspect pressure gauge for
Engine shut off
serviceability and the pressure is 100
33.
Before
pressure gauge
psi.
High-pressure pump
34.
Before
Inspect for looseness, damage
mounting plate
High-pressure pump
35.
Before
Check for proper level, fill as necessary
oil level/quantity
High-pressure pump Inspect for leakage, looseness,
There is leakage
36.
Before
at connections.
oil leaks
damage
High-pressure pump Inspect for leakage, looseness,
There is leakage
37.
Before
at connections.
water leaks
damage
Damage that
High-pressure
38.
Before
Inspect for leakage, form, fit, function
would prevent
shutoff valves
operation
High-pressure
39.
Before
Inspect for damage, corrosion
suction pipe spool
High-pressure
40.
Before
Inspect for damage, corrosion
discharge piping
Rupture disc
Make sure an intact rupture disc is in
41.
Before
Leakage.
assemblies
place. Check for leaks.
Pressure switch,
Inspect connections
42.
Before
high, 620-1500 psi
Inspect for broken or missing mounting There is any
hardware, cracks on weldments.
damage to
43.
Before
Pulsation dampener
Inspect for leaks.
weldments.
Pressure switch,
44.
Before
Inspect connections
low, 30-250 psi
45.
Before
Fuel tank fuel cock
Inspect for leakage, function
Inspect all wiring and connections,
Damage that
High-pressure pump
for cuts, wear, nicks, breaks,
would prevent
46.
Before
electrical system
exposed wires.
operation
High-pressure pump Inspect for looseness, connections,
47.
Before
junction box
wiring
Damage that
RO pressure vessel
Inspect for looseness, leakage, ring
48.
Before
would prevent
end caps
missing, bolt
operation
Inspect for looseness, corrosion,
49.
Before
RO 3-way ball valve
cracks.
RO Victaulic
Inspect for looseness.
50.
Before
adapters
RO product pipe
51.
Before
Inspect for looseness, cracks.
spool (manifold)
0037 00-7
