TM 5-3800-205-10-2
TROUBLESHOOTING PROCEDURES - CONTINUED
0011 00
Table 1. Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TRANSMISSION - CONTINUED
4.
Transmission Does Not Operate in Any
Speed.
NOTE
Before checking oil level, ensure that machine is parked on level ground, parking brake applied,
transmission in N (Neutral), oil warm, engine at low idle, and tank lowered with slight downward
pressure applied.
Check transmission oil level.
If transmission oil is low, fill to
correct level (WP 0013 00). If
problem still exists, notify Unit
Maintenance.
5.
Transmission Does Not Shift From One
1. Check position of shift lever
1. Unlock lever if required. If
problem still exists, go to test
Direction to Another.
rack.
step 2.
2. Check transmission oil level.
2. If transmission oil is low, fill to
correct level (WP 0013 00). If
problem still exists, go to test
step 3.
3. Control linkage
out
of
3. Notify Unit Maintenance.
adjustment.
6.
Transmission Does Not Shift From One
1. Check transmission oil level.
1. If transmission oil is low, fill to
correct level (WP 0013 00). If
Speed to Another.
problem still exists, go to test
step 2.
2. Control linkage
out
of
2. Notify Unit Maintenance.
adjustment.
7.
Transmission Engages, But Machine
There may be a mechanical
Notify Unit Maintenance.
Does Not Move. Engine Stops Running.
failure.
8.
Transmission Shifting is Rough.
Control linkage may be out of
Notify Unit Maintenance.
adjustment.
WATER DISTRIBUTOR SYSTEM
1.
Cannot Drain Residual Water From
1. Check that tank is lowered to
1. If tank is at lowest position and
lowest position.
problem still exists, go to test
Tank.
step 2.
2. Check drain hole for blockage.
2. Clear any blockage from drain
hole. If problem still exists,
notify Unit Maintenance.
