TM 10-4610-229-24
3-76. PISTON AND CONNECTING ROD REPLACEMENT/REPAIR
This task covers:
a.
Removal
b.
Disassembly
c.
Assembly
d.
Installation
INITIAL SETUP:
Use With
Supplies
High Pressure Pump Assembly
Oil, item 24, appendix C
Tags, item 34, appendix C
Tools
Heat chalk, item 20, appendix C
Solder, item 31, appendix C
General Mechanic's Automotive
Tool Kit, item 10, appendix B
Equipment
Common No. 1 Organizational
Condition
Maintenance Automotive
Para
Condition Description
Maintenance and Repair Shop
Equipment, item 11, appendix B
3-72
Oil pump removed.
3-64
Cylinder head removed.
a. Removal
1
Remove carbon ridge from top inside cylinder liners.
2
Turn crankshaft until two pistons are at bottom center.
3
Check connecting rods and caps for marked identification.
3-193
