TM 10-4610-310-14
0038 00
PROCEDURE - continued
5. Clean the mesh screen in the Y-strainer with clean water. Observe for debris. Install mesh screen and plug
into Y-strainer. See Figure 2.
Y-STRAINER
DRAIN VALVE
STRAINER
CAP
Figure 2. Y-Strainer.
6. Disconnect the UF filtrate inlet hose from the filtrate tank.
CAUTION
Do not proceed until the fabric tank is completely drained. Failure to adhere to this warning could
result in damage to Reverse Osmosis (RO) membrane elements.
7. Allow the filtrate tank to drain.
8. Disconnect the backwash pump suction hose from the filtrate tank. See Figure 3.
OVERFLOW HOSE
BACKWASH INLET
UF FEED INLET
FILTRATE OUTLETS
FILTRATE INLET HOSE
Figure 3. Filtrate Tank Connections.
