TM 5-3800-205-10-2
ADVANCED MACHINE OPERATION AND JOB SITE MANAGEMENT
GUIDELINES - CONTINUED
0006 00
MACHINE SERVICES AND CONFIGURATION CHANGES/ADJUSTMENTS - CONTINUED
6.
Spray Head Adjustment on Upper Spray Bar.
a.
Spray heads may be adjusted three ways to achieve differing spray results. Refer to charts at end of work package
for further guidance on appropriate settings.
b.
Raise or lower spray head to adjust spray head gap. Recommended height adjustment is in. (6.4 mm). Maximum
distance is achieved with spray head fully raised. To adjust height:
(1)
Hold handle and loosen bolt.
(2)
Raise or lower spray head until desired height is achieved.
(3)
Hold handle and tighten bolt.
c.
Circular adjustment of spray head alone will also change direction of spray pattern.
1/4 IN. (6.4 MM) RECOMMENDED
HANDLE
390-1519
BOLT
0006 00-7
