TM 10-4610-310-14
0102 00
SURGE ARRESTOR
CIRCUIT
BREAKER
GROUNDING
CONNECTOR
(INSIDE)
TERMINAL BOARD
MOTOR
SURGE
CONTROLLER
PLC OUTPUT
MAGNETIC
CARD 2
CONTACTOR
(CR1)
PLC OUTPUT
CARD 1
SURGE
PROGRAMMABLE
LOGIC
CONTROL RELAY
CONTROLLER
RELEASE CLIP
Figure 4. Control Module Internal Components (Bottom).
SURGE SUPPRESSOR BASE (XSP2-XSP21)
Removal
1. With the surge suppressor (SP2-SP21) removed and attached wires disconnected, loosen the center
screw on the base until it is free.
2. Pull up on the base and lift it off from the DIN mounting rail.
